Elevator exhaust fan. 250260m³Hr Air volume. Our Elevator Vent is an economical easily installed solution for any elevator shaft or machine room application. Provides up to 700 cfm. Dual control elevators in elevator doors shall be exhausted into chutes shall be used for fans. IBC 30062 refers to ventilation of the machine room for cooling purposes. Boxes Telephone Fireman Service Keys If the elevator industry uses a box we have it. SchinWestHghtn HEAT SINK FAN PC Basket. The filter system would replace the current exhaust fan on the top of the cab and would work by pushing purified and filtered air into the cab while exhausting contaminated air out the bottom.
Part Number CFM Volts Height Speeds. When replacing the elevator system it is best to remove this system and. We carry telephone boxes for commercial and. Round square 10 12 two speed three speed 120 vac 220 vac high performance.
A01FN002 Single speed suction blade for 120VAC fan A01FN001 Two speed suction blade for 120VAC fan A01FN003 Suction blade for 12VDC fan ELEVATOR CAB AC AND DC EXHAUST FANS Quality Elevator Products Inc. On occasion or in the case of a larger elevator the exhaust fan may be in CFM rating up to 750 to 950 CFM or multiple 365 CFM fans used.
In renovation design such as an elevator system modernization or a replacement project most older machine rooms and controllers were ventilated with outside air using a motorized damper with an air intake louve interlocked with a wall- or roof-mounted exhaust fan.
In each case the exhaust fan is intended to draw air. DC fans come with 12VDC motor as part of the stand-by 115VAC or 220VAC 5060Hz emergency ventilation system for glass elevators. Elevator cross flow Fan Model. For more information visit our Fans page.